Product Introduction-Glass Hollow Brick
Glass Hollow Brick is a brick made by gluing two pieces of glass together by burning and melting, and then stirring and cementing the edges with white glue to close the gap. Glass Hollow Brick is made of quartz sand, limestone, soda ash and other inorganic mineral raw materials by melting at high temperature, these ingredients are heated, will not produce benzene, ether and other harmful substances, so it is non-toxic and harmless, non-polluting, odorless, and will not cause harm to the human body.
Install Tips:
Construction Process：
1、Before construction, prepare the necessary materials, generally including: glass bricks, cement, sand, admixtures (gypsum powder, adhesives, etc.), steel bars, wire mesh, channel steel, metal profile frames, etc.
2、Mix white cement, fine sand, construction adhesive, and water in a ratio of 10:10:0.3:3 to form mortar.
3、Install the “+” or “T” type positioning brackets.
4、Lay glass bricks with mortar. Stack them layer by layer from bottom to top.
5、After laying, remove the excess plates on the positioning brackets.
6、Use a grout trowel to fill the joints and remove excess mortar.
7、Immediately wipe off the mortar on the glass bricks with a damp cloth.
1、Before construction, prepare the necessary materials, generally including: glass bricks, cement, sand, admixtures (gypsum powder, adhesives, etc.), steel bars, wire mesh, channel steel, metal profile frames, etc.
2、Mix white cement, fine sand, construction adhesive, and water in a ratio of 10:10:0.3:3 to form mortar.
3、Install the “+” or “T” type positioning brackets.
4、Lay glass bricks with mortar. Stack them layer by layer from bottom to top.
5、After laying, remove the excess plates on the positioning brackets.
6、Use a grout trowel to fill the joints and remove excess mortar.
7、Immediately wipe off the mortar on the glass bricks with a damp cloth.
Dear customer,if you have some question for example：MOQ,Delivery Time,More details of product,and else,Welcome to Contact Us,it is very pleasure to received customer response : )
Leave feedback about this