Art Cement Board-Thin Rammed Earth TRB2 Soft

INSTALLATION:

Step 1: first with a steel cutting machine to repair the edge, and then cut into the need to install on the wall size.

Step 2: positive Angle treatment: the two plates will be connected to the inside of the ground into a45 degree Angle, after stitching to make it more closed and more beautiful.

Step 3: Glue the art wallboard onto the wall. (Note: Hard wallboard can be glued with structural glue, soft wallboard must be glued with glue and filled to the whole board. If installed on the wood board,20%white latex should be added to the putty. Cement and repair materials should be ready to use when used, placed to the next day, all solidified, can not be used)

Step 4: affix art wallboard, press tight, let it and metope close. Pay attention to the use of the thickness of putty to adjust the surface of the flat.